Novation resources

Powering up in BootLoader mode

Bass Station II: Hold the 'Save', 'Patch left' and 'Patch right' buttons while powering on the Bass Station II

Circuit: Hold the 'Scales', 'Notes' and 'Velocity' buttons while powering on the Circuit.

Circuit Mono Station: Hold the 'Scales', 'Notes' and 'Velocity' buttons while powering on the Circuit Mono Station.

Peak: Hold the three buttons to the left of the LCD screen whole powering on Peak.

Summit: Hold the three buttons to the left of the LCD screen whole powering on Summit.

SL MKIII: Hold the 'Octave +' and 'Octave -' buttons while powering on the SL MKIII.

Launchkey Mini MK3: Hold 'Transpose', 'Octave +' and 'Octave -' while plugging in the USB cable.

Launchpad Mini MK3: Hold User while connecting the USB cable.

Launchpad X: Hold the Capture MIDI button while connecting the USB cable.

Launchpad Pro MK3: Hold down the Setup button while plugging in the USB cable.

source: https://support.novationmusic.com/hc/en-gb/articles/360002211360-I-am-unable-to-update-my-device-using-Novation-Components

Bass-Station II wheels calibration

  1. Hold down Save + Patch/Value Left & Patch/Value Right whilst turning the power switch on. The screen will show btl.
  2. Press right arrow three times so the screen shows cAL. Press Save once.
  3. Move the Pitch wheel to the bottom and hold. Press Save.
  4. Centre the Pitch wheel and press Save.
  5. Move Pitch wheel to the top and press Save.
  6. The screen will now show cbt.
  7. Move Mod wheel to the bottom and press Save.
  8. Move Mod wheel to the top and press Save.
  9. The screen will now show cAL again.
  10. Power cycle the Bass Station II.

source: https://support.novationmusic.com/hc/en-gb/articles/206862299-How-To-Calibrate-The-Pitch-And-Mod-Wheels-On-Bass-Station-II

© StudioCode.dev - Made with 11ty and tailwindcss.